BPS Props

$255$427

Description

The goal in propeller selection is to determine what propeller style and size will maximize performance for your boat while allowing the engine to operate in the recommended RPM range (optimized power band). The correct propeller will prevent the engine from over-revving, yet allow it to reach the preferred RPM where maximum horsepower, load-carrying capacity, and performance are produced. This mix may change depending on your needs, boat, load, and engine. Elevation and environmental conditions also affect this computation.

Introducing Our New GTR XD Propeller Lineup. Now available for the GTR XD:

  • Big Blade GTR XD 12 x 10 with 3/4″ Hex
  • Hammer GTR XD 12.75 x 11 with 3/4 Hex
  • Raptor Three Blade GTR XD 12 x 11 with 3/4″ Hex
  • Three Blade GTR XD 12 x 10 with 3/4″ Hex

Highlights:

  • Made to fit all Gator Tail XD motors
  • Better performance than stock propellers
  • Smooth mud running
  • Better holeshots than comparable outboard motors with a stock propeller
  • 30% thicker cup on trailing edge

 

More information on prop selection and selection chart

12.25 X 10 WITH 3/4″ HEX

  • Guaranteed fastest mud motor blade on the market
  • Fits all major brands
  • Better performance
  • Better mud running
  • Better hole shots
  • 30% thicker
  • Cup on trailing edge

12.75 X 11 WITH 3/4″ HEX

The Hammer Prop should only be used on motors that will rev to at least 4400 RPMs in the water.

The proprietary process we use to build the Tiger Propeller is the same formula used to build high-performance bass boat propellers. Every blade and every section of each blade is held to strict tolerances; and is so precise, that they require no balancing or polishing.   Picture perfect every time.  You won’t find better quality and price anywhere.

Check out these features.  A real value for today’s hunter.

  • Stainless steel, Rockwell hardness of 39-41.  All other mud motor blades are Rockwell 31 to 34. Harder blades last longer, perform better in all conditions and deform less under load
  • Sizes from 3 to 120 horses
  • Blade ends are double-cupped for four-wheel-drive performance
  • The machined taper face promotes better alignment which eliminates drive vibration
  • Improved rake increases speed in open water
  • A wide blade face ensures better hole-shots in mud

12 X 10.5 WITH 3/4″ HEX

  • Guaranteed fastest mud motor blade on the market
  • Fits all major brands
  • Better performance
  • Better mud running
  • Better hole shots
  • 30% thicker
  • Cup on trailing edge

12 X 11 WITH 3/4″ HEX

  • Improved shallow water performance over Mercury 3 Blade
  • Superior vibration characteristics over any two Blade
  • Best reverse performance on the market
  • Improved top end over Big blade and hammer
  • Fits all major brands with a 3/4 hex shaft
  • Better hole shots
  • 30% thicker
  • Cup on trailing edge for a longer lasting prop

11 X 10 WITH 3/4″ HEX

  • Guaranteed fastest mud motor blade on the market
  • Fits all major brands
  • Better performance
  • Better mud running
  • Better hole shots
  • 30% thicker
  • Cup on trailing edge

Additional information

Manufacturer

Mud Buddy, Gator Tail

Model

Big Blade, Hammer, 3 Blade, Raptor 3 Blade, 2 Blade

Clear
View cart